The LT50 50nm is suitable for a wide range of application types including roller blinds roller shutters and awnings. Available in torques from 6Nm to 50Nm.
Comes with a 48mm design suitable for tube 50mm to 65mm.
* Parallel wiring of motors is prohibited without the use of an isolation controller, eg. 4AC Motor Controller,
4 Motor Group Controller, etc. Direct switching of a 230V motor must always be done via a mechanical interlock.
Support
roller shutter motor selection chart
external motor selection chart
Technical Information
DIMENSION |
|
---|---|
Length (L1) | 663 mm |
Basic crown for tube diameter | 50 x 1,5 mm |
Weight | 2.8 Kg |
Overall length (L3) | 655 mm |
Riveting position distance (L2) | 640 mm |
CABLE |
|
---|---|
Plug in cable | Black LT Plug |
Cable type | PVC |
Wire section | 0,75 mm² |
Color | White |
Wire Length | 2,5 m |
Number of wires of the cable | 4 |
MECHANICAL
|
|
---|---|
Capacity of the limit switch unit | 46 turns |
Type of limit switch unit | Quick limit switch |
Type of head | Star |
Nominal Speed | 17 rpm |
Nominal Torque | 50 Nm |
Repeatability | ± 5 ° |
ELECTRICAL
|
|
---|---|
Consumption during operation | 270 W |
Minimum voltage | 207 V |
Maximum Voltage | 244 V |
Rated current | 1.1 A |
Nominal Voltage / Frequency |
230VAC - 50Hz |