The Nice DOMI W1 remote control is perfect for easily operating your roller shutters and awnings. Modern and stylish, it blends seamlessly into interiors thanks to its square mounting plate. It allows smooth and secure management of your installations with its advanced dual bidirectional coding and Rolling Code O-Code technology.
Remote Control Registration Guide
Programming the Nice DOMI W1 remote control with your receiver is simple. Follow these steps to configure your remote control with your Nice motors:
- Preparation (if necessary): If your system is not compatible with the bidirectional mode, press and hold the "PRG" and "ESC" buttons on the back simultaneously, and the "-" button on the front. The LED flashes green, then lights up red. The O-Code configuration is now activated.
- Locate the receiver: It is usually located in the motor of your roller shutter or awning.
- Activate programming mode: Hold the programming button on the receiver until the LED indicator lights up.
- Pair the remote control: Press the button on the remote control to register it. A quick flash confirms the successful pairing.
- Check operation: Press the button on the remote control to test if the motor responds correctly.
Support
Technical Information
- Frequency: 433.92 MHz
- Number of channels: 1 channel
- Number of buttons: 4 (Up, Down, Stop, and Status Request)
- Power supply: AAA batteries (included)
- Coding system: Dual bidirectional coding (BD) and Rolling Code (O-Code)
- Dimensions: 50 x 50 x 13 mm
- Range: Up to 200 m outdoors and 35 m indoors
- Manual: Digital version provided (QR code on the packaging)