The LT60 120nm 12 RPM is suitable for larger roller shutters and awnings.
To be used in tube from 70mm to 102mm
Parallel wiring of motors is prohibited without the use of an isolation controller, eg. 4AC Motor Controller,
4 Motor Group Controller, etc. Direct switching of a 230V motor must always be done via a mechanical interlock.
Support
Roller shutter motor selection chart
Technical Information
ELECTRICAL |
|
|---|---|
| Consumption during operation | 400 W |
| Minimum voltage | 207 V |
| Maximum Voltage | 244 V |
| Rated current | 1.8 A |
| Nominal Voltage / Frequency | 230V - 50Hz |
MECHANICAL |
|
|---|---|
| Capacity of the limit switch unit | 35 turns |
| Type of limit switch unit | Quick limit switch |
| Nominal Speed | 12 rpm |
| Nominal Torque | 120 Nm |
| Repeatabilty | ± 5 ° |
STANDARD |
|
|---|---|
| Approval | RCM |
| Protection Index | IP 44 |
| Insulation class | Class I |
CABLE |
|
|---|---|
| Plug in cable | Black LT Plug |
| Cable type | PVC |
| Wire section | 0,75 mm² |
| Color | White |
| Wire Length | 2,5 m |
| Number of wires of the cable | 4 |
DIMENSION |
|
|---|---|
| Length (L1) | 665 mm |
| Basic crown for tube diameter | 60 x 1,5 mm |
| Weight | 4,45 Kg |
| Overall length (L3) | 659 mm |
| Riveting position distance (L2) | 642 mm |