These motors are NOT remote control and require a WSB01 limit setting tool to electronically set the limits. Control is via a building management system or by wall switches which are available separately. These motors may be parallel wired if desired. Limits may be set by using either the WSB01 limit setting tool or by using the button on the motor head.
All Alpha motors come with a 60mm octagonal drive and crown wheel as standard. See our drive wheel page for others.
For use with C-Bus and similar systems
Parallel wiring compatible
Counter balanced noise suppression
Support
WSEC Universal motor instructions
4 core motor active wire assignments
Technical information
35mm diameter
240V / 50Hz
Electronic limit switch
For use with C-Bus and similar systems
Parallel wiring compatible
Counter balanced noise suppression
| RATED TORQUE (Nm) | 5 |
| OUTPUT SPEED (rpm) | 28 |
| NOMINAL CONSUMPTION (W) | 116 |
| NOMINAL VOLTAGE (V) | 240 |
| NOMINAL CURRENT (A) | 0.49 |
| RUNNING TIME (Min) | 4 |
| PROTECTION INDEX (IP) | 44 |
| TOTAL LENGTH (mm) | 560 |
| MAXIMUM TURNS | INFINITY |
| NET WEIGHT (kg) | 1.35 |
Dimensions
Total Length (mm) 560